Skip to content

NSPanel HAUI Docs

Welcome! NSPanel HAUI turns your Sonoff NSPanel into a smart touchscreen dashboard for Home Assistant — all configured through a visual editor in the HA UI.

Whether you just got your panel or want to fine-tune it, this guide will get you there.

New to NSPanel HAUI? → Start with the Quick Start Guide.

Getting Started

If you're setting up a new NSPanel, follow these steps in order:

  1. Install the integration — Add NSPanel HAUI to Home Assistant via HACS. → Installation guide

  2. Flash your device — Load ESPHome firmware onto the NSPanel. → ESPHome setup

  3. Connect it — Add the device in Home Assistant (Settings → Devices & Services). → Integration setup

  4. Configure your panels — Open the web frontend and start building your dashboard. → Configuration overview

  5. Device settings — brightness, sounds, screensaver, buttons
  6. Panel layout — add, remove, reorder panels

  7. Items & entities — pick entities, set icons, colors

  8. Browse panel types — See what kinds of panels you can add. → All panel types

Guides

Hands-on help for common tasks.

Setting up

  • Quick Start — Get up and running in 5 minutes
  • Installation — Step-by-step: HACS, flashing, first setup
  • Configuration — Device settings, panel layout, item editing
  • Examples — Real-world configs to copy and adapt

Using your panel

Need help?

  • FAQ — Answers to common questions
  • Troubleshooting — Fixing connection issues, display problems, and more

Development

Want to understand the internals, extend the integration, or contribute?

Development docs — architecture, component design, versioning